ESSVE Adjustable post base, type BH high, is intended for use as a support of pillars and posts that are secured in concrete or stone. The adjustable post base is used when the possibility of height adjustment is required.

Adjustable post base Type BH high consists of two square plates, one welded M16 bolt and a low nut and a long nut. The plates have a thickness of 6 mm and has 4 x Ø8.0 mm holes in each corner. In the centre of the base plate is the welded M16 bolt. Adjustable post base Type BH high is designed for installation under pillars and posts against concrete/stone substrate. The intermediate support leg is adjustable 50 mm, i.e. between 115 and 165 mm from the concrete surface to the lower edge of the pillar/post.

Adjustable Post base Type BH high is installed on concrete/stone plate and on the post end with 4 bolts in each part before assembly.