ESSVE Adjustable post base, type B2 low, is intended for use as a support of pillars and posts that are secured in concrete or stone. The adjustable post base is used when the possibility of height adjustment is required.

Adjustable post base Type B2 low consists of two square plates, one welded M20 bolt and a nut. The base plate 90x90 mm has a thickness of 6 mm and has 4 x Ø11.0 mm holes in each corner. In the centre of the plate is the welded M20 bolt. The upper plate 80x80 mm has a thickness of 8 mm and has 4 x Ø8.5 mm holes. Adjustable post base Type B2 low is designed for installation under pillars and posts against concrete/stone substrate.
Adjustable 40 mm, i.e. between 35 and 75 mm from the concrete surface to the lower edge of the pillar/post.

The centre of the post is predrilled with 20 mm and to a depth of min 120 mm. Adjustable Post base Type B2 low is installed on concrete/stone plate and on the post end with 4 bolts in each part before assembly.