For the installation of windows, glazed sections, interior and exterior doors with frames made primarily of wood, but also plastic and aluminium depending on the frame's prerequisites. Programa PLUS allows subsequent adjustment, which is a significant advantage when the frame, door or wall ”sags”.
Description
ESSVE Programa Plus Frame screw consists of a zinc sleeve with an exterior thread and a steel screw which can revolve freely in the sleeve. When mounted the frame screw sleeve is fixed in the frame and the screw in the wall. By screwing the sleeve but not the screw, the frame can be adjusted inwards and outwards. Programa Plus Frame screw can be mounted without fixed blocks and provides for fully adjustable and removable mounting without damage to frames or base. Installation with Programa Frame screws improves and facilitates insulation, as the use of mineral wool or jointing foam allows for uninterrupted caulking.
The spacing between the frame and the wall determines the length of frame screw to be used.
Installation depth in wooden joists is min. 45 mm.
Drill a 14 mm hole straight-through with Frame screw drill DLT 5.
For a pre-drilled frame installation is performed directly.
Fit the frame screw with Installation key UN-T or KMN.
Adjust if necessary with Universal key UN-T or KMN.
Cover the hole with a cap in an appropriate colour.Tip! Use KarmFix Programa as an installation tool in wooden wall structures, so there is no need to use wedges.
