ESSVE Wood screw HEX with two fibre cuts, hexagonal head intended for most installation work in wood, chipboard, plywood
, etc.

The screw is produced in hardened carbon steel with CorrSeal surface treatment for outdoor environments
The screw is fitted with a cutter along the stem and one on the point. This means a very low drive-in torque in harder materials and minimises splitting.
On screws longer than 130 mm, there is an additional fibre cut directly after the usual wood thread, this is to facilitate installation of longer and thicker screws. The screw conforms to the CE requirement as per EN14592.

Recommended rpm: 400-1200/min.