Suitable for the fixation of facades, roofs, wood- and metal constructions, metal profiles, columns, beams, consoles, railings, sanitary devices, cable trays, piping, post-installed rebar connection (reconstruction or reinforcement) etc.

ESSVE Chemical Anchor ONE is a styrene-free vinylester resin that is delivered in a 2-component foil tube cartridge system. This high-performance product may be used in combination with a hand-, battery- or pneumatic tool and a static mixer. It was designed especially for the anchoring of threaded rods, reinforcing bars or internal threaded rod sleeves into concrete (also porous and light) as well as masonry. Based on the excellent viscous behaviour the application in hollow masonry material, in combination with a perforated plastic sleeve, is obvious. ESSVE ONE is characterized by a huge range of applications with an installation temperature range 0°C up to +40°C and an application temperature range -40°C to +120°C after full curing. As well as by high chemical resistance for applications in extreme ambiences e.g. in swimming pools (chlorine) or in closeness to the sea (salt). The wide range of certificates, national and international approvals, allows nearly every application.

Handling and storage

Storage: Store in a cold and dark place, storage temperature: from +5°C up to +25 °C 

Shelf life: Minimum 3 months for foil tubes. 

Cartridge can be reused up to the end of the shelf life by replacing the static mixer or resealing cartridge with the sealing cap

Properties and benefits

• European Technical Assessment for use in concrete (cracked and uncracked): ETA-18/0617 
• European Technical Assessment for use in masonry: ETA-18/0642 
• US-approval acc. to AC 308 for use in concrete (ICC-ES): ESR-2539 
• Certificated for drinking water applications acc. to NSF/ANSI Standard 61 
• Fire resistance test report: EBB 170019-24 
• Installation in water-filled bore holes (e.g. rain water) 
• Overhead application 
• Low odour 
• Suitable for attachment points with small edge- and anchor spacing distances due to an anchoring free of expansion forces (e.g. Compared to wedge anchors) 
• High chemical resistance 
• High bending and pressure strength

See ETA document